element01 element03

賀陳弘教授

學術著作 (點選直接以PDF檔開啟)

Drilling of Composite Materials
Hocheng, H. and Dharan,C.K.H., 1990, "Delamination During Drilling in Composite Laminates", ASME Trans. J. Engineering for Industry, Vol.112, pp.236-239.

Hocheng, H. and Jia, C.L., 1991, "Reliability Monitoring in Drilling Electronic CircuitBoards", ASME Trans. J. Electronic Packaging, Vol.113, pp.263-267.

Hocheng, H. and Puw, H.Y.,1992, "On Drilling Characteristics of Fiber-ReinforcedThermoset and Thermoplastics", International Journal of Machine Tools & Manufacture, Vol.32, pp.583-592.

Hocheng, H.and Puw, H.Y., 1993, "Machinability of Fiber-Reinforced Thermoplastics in Drilling", ASME Trans. J. of Engineering Materials and Technology, Vol.115, pp.146-149.

Hocheng, H., Puw, H.Y.and Yao, K. C.,1994, "Machinability of Some Fiber-Reinforced Thermoset and Thermoplastics in Drilling", Materials and Manufacturing Processes, Vol.6, pp.653-682.

Hocheng, H. and Tsao, C.C., 2003, "Comprehensive Analysis of Delamination in Drilling of Composite Materials with Various Drill Bits", Journal of Materials Processing Technology, Vol. 140, pp.335-339.

Hocheng, H. and Tsao, C.C., 2003, "Analysis of Delamination in Drilling Composite Materials Using Core Drill", The Inaugural Issue of Australian Journal of Mechanical Engineering, Vol.1, No.1, pp.49-53.

Tsao, C.C. and Hocheng, H., 2003, "The Effect of Chisel Length and Associated Pilot Hole on Delamination when Drilling Composite Materials", International Journal of Machine Tools & Manufacture, Vol.43, No.11, p.1087-1092

Taso, C. C. and Hocheng, H., 2004,"Taguchi Analysis of Delamination Associated with Various Drill Bit in Drilling of Composite Material", International Journal of Machine Tools & Manufacture, Vol. 44, No.10, pp.1085-1090.

Tsao, C.C. and Hocheng, H., 2005, "Effect of Eccentricity of Twist Drill and Candle Stick Drill on Delamination in Drilling Composite Materials", International Journal of Machine Tools & Manufacture, Vol.45, pp.125-130.

Tsao, C.C. and Hocheng, H., 2005, “Computerized Tomography and C-Scan for Measuring Delamination in Drilling of Composite Material Using Various Drills", International Journal of Machine Tools & Manufacture, Vol.45, pp. 1282-1287.

Tsao, C.C. and Hocheng, H., 2005, “Effects of Exit Back-up on Delamination in Drilling Composite Materials Using a Saw Drill and a Core Drill", International Journal of Machine Tools & Manufacture, Vol.45, pp.1261-1270.

Hocheng, H. and Tsao, C.C., 2005, “The Path Towards Delamination-Free Drilling of Composite Materials", a review paper in Special Issue of Journal of Materials Processing Technology celebrating the 70th birthday of Prof. Frank W. Travis, Vol.167, pp.251-264.

Hocheng, H. and Taso, C. C., 2006, “Effects of Special Drill Bits on rilling-Induced Delamination of Composite Materials”, International J. Machine Tools and Manufacture, Vol.46, pp.1403-1416.

Hocheng, H. and Tsao, C. C., 2007, “Computerized Tomography and C-scan for Measuring Drilling-Induced Delamination in Composite Material Using Twist Drill and Core Drill”, accepted to the Key Engineering Materials, ol.339, pp.16-20.

Tsao, C.C. and Hocheng, H., 2007, “Parametric Study on Thrust Force of Core Drill", Journal of Materials Processing Technology, Vol.192, pp.37-40.

Tsao, C.C. and Hocheng, H., 2007, “Effect of Tool Wear on Delamination in Drilling Composite Materials", International Journal of Mechanical Sciences, Vol. 49, pp.983-988.

Tsao, C. C. and Hocheng, H., 2008, “Analysis of Delamination in Drilling Composite Materials by Core-Saw Drill”, International Journal of Materials and Product Technology, pp.188-201.

Tsao, C. C. and Hocheng, H., 2008, “Evaluation of Thrust Force and Surface Roughness in Drilling Composite Material Using Taguchi Analysis and Neural Network”, Journal of Materials Processing Technology, Vol. 23, p.342-348.

Tsao, C. C. and Hocheng, H., 2008, “Effect of Peripheral Drilling Moment on Delamination Using Special Drill Bits”, Journal of Materials Processing Technology, Vol 201/1-3, pp. 471-476.


Hocheng, H. and Tsao, C. C., 2009, “A Treatment of Drilling-Induced Delamination of Composite Materials”, Chapter 1 of Drilling of Composite Materials, Ed. J.P. Davim, Nova Science, USA.

Hocheng, H. and Tsao, C.C., 2012, "Micromechanisms of Delamination in Composite Materials Induced by Drilling", a chapter in the Encyclopedia of Composites, 2nd Ed., L. Nicolais and A. Borzacchiello, John Wiley & Sons, USA, ISBN 978-0-470-12828-2.

Tsao, C.C., Hocheng, H. and Chen, Y.C., 2012, “Delamination Reduction in Drilling Composite Materials by Active Backup Force”, CIRP Annals - Manufacturing Technology, Vol.61, pp.91-94.

Milling/ Turning/ Grinding/ Chip Formation
Hocheng, H. and Leu, S. C., 1992, "Machining Characteristics of Carbon Fiber-Reinforced Epoxy Tube in Turning", Composites, Vol.32, No 3, pp.136-140.

Hocheng, H., Puw, H. Y. and Huang, Y., 1993, "Preliminary Study of Milling of Unidirectionally Fiber-Reinforced Plastics", Journal of Composites Manufacturing (predecessor of Composites, Part A), Vol.4, pp.103-108.

Hocheng, H. and Puw, H.Y., 1993, "Machinability Test of Carbon Fiber-Reinforced Epoxy in Milling", Materials and Manufacturing Processes, Vol.8, pp.717-730.


Tsai, H. H. and Hocheng, H., 1996, "Numerical Investigation of Transient Thermal Stresses of Workpiece in Surface Grinding", Journal of Thermal Stresses, Vol.19, No 6, pp.565-578.

Tsai, H. H. and Hocheng, H., 1997, "Monitoring of Creep-in Depth Beyond the Initial Wheel/Workpiece Contact in Surface Grinding by Acoustic Emission", Journal of Machining Science and Technology, Vol 1,No 1, pp.15-32.

Hocheng, H., Yen, S.B., Ishihara, T. and Yen, B.K., 1998, "Fundamental Turning Characteristics of A Tribology-Favored Graphite/Aluminum Alloy Composite Material", Composites, Part A, Vol.28, pp.883-890.

Tsai, H. H. and Hocheng, H., 1998, "Investigation of Transient Thermal Deflection and Stresses of Workpiece in Surface Grinding with Application of Cryogenic Magnetic Chuck", Journal of Material Processing Technology, Vol.79, pp.177-184.

Tsai, H. H. and Hocheng, H., 1998, "Analysis of Transient Thermal Bending Moments and Stresses of the Workpiece During Surface Grinding", Journal of Thermal Stresses, Vol.21, No 6, pp.691-711.

Puw, H.Y and Hocheng, H.., 1998, "Chip Formation Model of Cutting Fiber-Reinforced Plastics Perpendicular to Fiber Axis", ASME Trans. J. of Manufacturing Science and Engineering, Vol 120, No 1, pp.192-196.

Puw, H.Y. and Hocheng, H., 1999, "Milling of Polymer Composites", a chapter in Machining of Ceramics and Composites, Ed. S. Jahanmir and M. Ramulu, Marcel Dekker Book, pp.267-294.

Tsai, H. H. and Hocheng, H., 2001, "Monitoring Strategy of Thermal-induced Convex Deformation of Workpiece in Surface Grinding", International Journal of Advanced Manufacturing Technology, Vol 17, No 10, pp.710-714.

Tsao, C.C. and Hocheng, H., 2001, “Comparison of the Tool Life of Tungsten Carbides Coated by Multilayer TiCN and TiAlCN for End Mills Using the Taguchi Method”, Journal of Materials Processing Technology, Vol.123, pp. 1-4.


Tsai, H. H. and Hocheng, H., 2002, "On-Line Identification for Thermal-induced Convex Deformation of Workpiece in Surface Grinding", Journal of Materials Processing Technology, Vol.121, No.2-3, pp.189-201.

Tsai, H. H. and Hocheng, H., 2002, "Prediction of Thermal-induced Concave Surface of Workpiece in Surface Grinding", Journal of Materials Processing Technology, Vol.122, Nos.2-3, pp.148-159.

Tsao, C.C. and Hocheng, H., 2002, “Comparison of Tool Life of Tungsten Carbides Coated by Multi-layer TiCN and TiAlCN for End Mills using Taguchi Method”, Journal of Materials Processing Technology, Vol.123, No.1, pp.1-4.

Hocheng, H. and Hsieh, M.L., 2004, "Signal Analysis of Surface Roughness in Diamond Turning of Lens Molds", International Journal of Machine Tools & Manufacture, Vol. 44, No.15, pp. 1607-1618.

Hocheng, H., Lin, S.Y. and Lei, W.T., 2005, "Surface Finish in Machining of Dental Ceramics", Materials Science Forum, Vols.505-507, pp.1231-1236.

USM/WJM (Ultrasonic Machining/ Water Jet Machining)
Hocheng, H. 1990, "A Failure Analysis of Water Jet Drilling in Composite Laminates", International Journal of Machine Tools & Manufacture, Vol.30, pp.423-429.

Hocheng, H. and Chang, K.R., 1994, "Material Removal Analysis in Abrasive Water Jet Cutting of Ceramic Plates", Journal of Materials Processing Technology, Vol.43, No.40,pp.287-304.

Hocheng, H. and Hsu,.C.C. 1995, "Preliminary Study of Ultrasonics Drilling of Fiber- Reinforced Plastics", Journal of Materials Processing Technology, Vol.48, pp.255-266.

Hocheng, H., Tsai, H. Y., Shiue, C.C. and Wang, B., 1997, "Feasibility Study of Abrasive-Water Jet Milling of Fiber-Reinforced Plastics", ASME Trans. J. Engineering for Industry, Vol.119, pp.133-142.

Hocheng, H., Kuo, K.L. and Lin, C.T., 1999, "Machinability of Ultrasonic Drilling of Zerconia", Materials and Manufacturing Processes, Vol.14, No.5, pp.713-724.

Hocheng, H., Tai, N.H. and Liu, C.H., 2000, "Assessment of Ultrasonic Drilling of C/SiC Composite Material", Composites, Part A, Vol.31, No.2, pp.133-142.

Hocheng, H. and Hsu, M.Y., 2000,"Erosion Wear of Stainless Steel by Abrasives Entrained in a Water Jet", Arabian Journal for Science and Engineering, Vol.25, No.1B, pp. 189-202.

Jeng, F.S., Huang, T.H., Lu, Y.C. and Hocheng, H., 2001,"Threshold Condition for Penetrating Rocks Using High Pressure Waterjet", Journal of Civil and Hydraulic Engineering, Vol 13, No 3, pp.677-681.

Hocheng, H. and Kuo, K.L., 2002, "On-Line Tool Wear Monitoring during Ultrasonic Machining Using Tool Resonance Frequency", Journal Materials Processing Technology, Vol 123, No.1, pp. 80-84.

Hocheng, H. and Kuo, K.L., 2002, "Fundamental Study of Ultrasonic Polishing of Mold Steel", International Journal of Machine Tools and Manufacture, Vol 42/1, pp.7-13.

Hocheng, H. and Weng, C.H., 2002, "Hydraulic Erosion of Concrete by a Submerged Jet", ASM Trans. J. of Materials Engineering and Performance, Vol 11, No 3, pp.256-261.

Laser Machining
Hocheng, H. and Pan,C.T., 1996, "The Anisotropic Heat Affected Zone in Laser Grooving of Fiber-Reinforced Composite Material", Journal of Materials Processing Technology, Vol. 62/1-3, pp.54-60.

Pan, C.T. and Hocheng, H., 1998, "Prediction of Extent of Heat Affected Zone in Laser Grooving of Unidirectionally Fiber-Reinforced Plastics", ASME Trans. J. of Engineering Materials and Technology, Vol.120, pp.321-327.

Hocheng, H. and Pan, C.T., 1998, "Prediction of Laser-Induced Thermal Damage of Fiber Mat and Fiber MatUD-Reinforced Polymers", ASM Trans. J. of Materials Engineering and Performance, Vol.7, No.6, pp.751-756.

Uhlmann, E., Spur, G., Hocheng, H., Liebelt, S. and Pan, C.T., 1999, "The Extent of Laser-Induced Thermal Damage of Fiber UD and Cross-ply Composite Laminates", International Journal of Machine Tools & Manufacture, Vol.39, No.4, pp.639-650.


Hocheng, H. and Pan, C.T., 1999, "The Effects of Cryogenic Surroundings on Thermal Induced Damage in Laser Grooving of Fiber-Reinforced Plastics", Journal of Machining Science and Technology, Vol.3, pp.77-90.

Pan, C.T. and Hocheng, H., 2001, "Evaluation of Anistropic Thermal Conductivity for Unidirectional Fiber-Reinforced Plastics in Laser Machining of Unidirectionally Fiber- Reinforced Plastics", Composites, Part A, Vol.32, No.11, pp.1657-1667.

Hocheng, H., and Wang, K.Y., 2007, “Analysis and Fabrication of Mini-feature Lamp Lens by Excimer Laser Micromachining”, Applied Optics, Vol. 46, pp. 7184-7189.

Hocheng, H. and Wang, K.Y., 2008, "Microgroove Pattern Machined by Excimer Laser Dragging", International Journal of Manufacturing Technology and Management, Vol.13, No.2/3/4, pp.241-253.

Hocheng, H. and Wang, K.Y., 2011, Analysis of Excimer Laser Machining of Micropatterns, a book published by LAP Lambert Academic Publishing. (ISBN: 978-3-8443-9569-3)

Hocheng, H., Umesh, J. and Lin, T,C,, 2013, “Laser Surface Patterning”, a chapter in Laser Processing and Laser Surface Treatment, Ed. B.S. Yilbas, Elsevier, Amsterdam. (in press)

EDM (Electrical Discharge Machining)
Hocheng, H., Lei, W.T. and Hsu, H.H., 1997, "Preliminary Study of Material Removal in Electrical-Discharge Machining of SiC/Al", Journal of Materials Processing Technology, Vol. 63, pp.813-818.

Guu, Y.H. and Hocheng, H., 2001,"Effects of Workpiece Rotation on Machinability during Electrical Discharge Machining", Materials and Manufacturing Processes, Vol.16, No.1, pp.91-101.

Hocheng, H., Guu, Y.H. and Tai, N.H. 1998, "The Feasibility Analysis of Electrical Discharge Machining of Carbon-Carbon Composite Materials", Materials and Manufacturing Processes, Vol.13, pp.117-132.

Guu, Y.H., Hocheng, H., Tai, N.H. and Liu, S.Y., 2001, "Effects of Electrical Discharge Machining on Characteristics of Carbon-Fiber Reinforced Carbon Composites", Journal of Materials Science, Vol 36, pp.2037-2043.

Hocheng, H. and Guu, Y.H., 2001,"High-Cycle Fatigue of Electrical-Discharge Machined AISI D-2 Steel", International Journal of Materials and Product Technology, Vol 16, No 6/7, pp.642-657.

Guu, Y.H. and Hocheng, H., 2001,"Improvement of Fatigue Life of Electrical Discharge Machined AISI D2 Tool Steel by TiN Coating", Journal of Material Science and Engineering, Vol A318, pp.155-162.

Guu, Y.H., Hocheng, H., Chou, C.Y. and Deng, C.S., 2003,"Effect of Electrical Discharge Machining on Surface Characteristics and Machining Damage of AISI D2 Tool Steel", Journal of Material Science and Engineering, Vol A358, pp.37-43.

Mai, C.C., Hocheng, H. and Huang, S., 2011, "Advantages of Carbon Nanotubes in Electrical-Discharge Machining", International Journal of Advanced Manufacturing Technology. (on line first in June)

Mai, C.C., Hocheng, H. and Huang, S., 2012, "Advantages of Carbon Nanotubes in Electrical-Discharge Machining", International Journal of Advanced Manufacturing Technology, Vol. 59, No. 1, pp. 111-117.

 

 

EP/ECM (Electrochemical Polishing/ Electrochemical Machining)
Hocheng, H., Kuo, C. L. and Wei, S.W., 1999, "Electropolishing of a Spherical Surface and the Application of Fuzzy Inference", International Journal Electrical Machining, Vol.4, pp.19-28.

Hocheng, H. and Pa, P.S., 1999, "Electrobrightening and Electropolishing of Holes Using Feeding Electrodes", Journal of Material Processing Technology, Vol. 89/90, pp.434-446.

Hocheng, H. and Pa, P.S., 2000, "Ring-Form Electrode in Electropolishing of External Cylindrical Surface", International Journal of Electrical Machining, Vol.5, pp.7-15.

Hocheng, H. and Pa, P.S., 2001, "Electrode Form Design and Ultrasonic Aid in Electropolishing of Holes", International Journal of Electrical Machining, pp.33-39.

Hocheng, H., Gao, P.S. and Chen, Y.F., 2001, "Electropolishing of of 316L Stainless Steel for Anticorrosion Passivation ", ASM Trans. J. of Materials Engineering and Performance, Vol 10, No 4, pp.414-418.

Hocheng, H. and Pa, P.S., 2002, "Application of Turning Tool as Electrode in Electropolishing, Journal of Materials Processing Technology, Vol.120, pp.6-12.

Hocheng, H. and Pa, P.S. 2003, "Effective Form Design of Electrode in Electrochemical Smoothing of Holes", International Journal of Advanced Manufacturing Technology, Vol.21, No.12, pp. 995-1004.

Hocheng, H., Y.H. Sun, S.C. Lin and P.S.Gao, 2003, "A Material Removal Analysis of Electrochemical Machining Using Flat-End Electrode", Journal of Materials Processing Technology, Vol. 140, pp. 264-268.

Hocheng, H. and Pa, P.S., 2003, "Continuous Secondary Ultrasonic Electropolishing of SKD61 Cylindrical Part", International Journal of Advanced Manufacturing Technology, Vol.21, No.4, pp.238-242

Hocheng, H. and Gao, P.S., 2003, "Optimization of Electropolishing of Stainess Steel by Gray Relational Analysis", Journal of Materials Processing Technology, Vol. 140, pp. 255-259.

Hocheng, H. and Pa, P.S., 2003, "Electropolishing of Cylindrical Workpiece of Tool Materials Using Disc-Form Electrodes", Journal Materials Processing Technology, Vol.142, No.1, pp.203-212.

Hocheng, H. and Pa, P.S., 2004, "Design of Arrow-Head Electrode in Electropolishing of Cylindrical Part", International Journal of Materials and Product Technology, Vol.20, No.4, pp.312-326.

Hocheng, H., P.S.Gao and Lin, S.C., 2005, "Generation of Erosion Profile of Through Hole in Electrochemical Boring Using Stepwise Moving Electrode", International Journal of Manufacturing Technology and Management, Vol.7, No.2-4, pp.268-286.

Hocheng, H., Gao, P.S. and Lin, S.C., 2005, "Development of the Eroded Opening during Electrochemical Boring of Hole", International Journal of Advanced Manufacturing Technology, Vol. 25, No. 11/12, pp. 1105 – 1112.

Pa, P.S. and Hocheng, H., 2005, "Using Borer-Shape Electrode in Electrochemical Smoothing of Hole", Material Science Forum, Vols.505-507, pp.793-798.

Pa, P.S. and Hocheng, H., 2007, "Design of Rib Plate of Electrode in Electrochemical Smoothing and Electrobrightening of Large Hole", International Journal of Advanced Manufacturing Technology, Vol.34, No.5-6, pp.517-526.

Hocheng, H and Pa, P.S., 2007, "A Review of Electrode Design for Electrochemical Drilling and Electropolishing of Holes", Current Topics in Electrochemistry, Vol.12, pp.33-49.

CMP (Chemical Mechanical Planarization/Polishing)
Hocheng, H., Huang, Y. L. and Chen, L.J., 1999, "Kinematic Analysis and Measurement of Temperature Rise on Pad in CMP", Journal of the Electrochemical Society, Vol.146, No.11, pp.4236-4239.

Hocheng, H. and Tsai, H.Y., 1999, "A Material Removal Model in Chemical Mechanical Planarization of Silicon Dioxide Film and Bare Silicon Wafer", International Journal of Chemical Mechanical Planarization, Vol.1, No.1, pp.90-101.

Hocheng, H., Tsai, H.Y. and Tsai, M.S., 2000, "Effects of Kinematic Variables on Nonuniformity in Chemical Mechanical Planarization", International Journal of Machine Tools & Manufacture, Vol.40, pp.1651-1669.

Hocheng, H., Tsai, H.Y. and Huang, Y.L., 2001, "Essential Aspects in Chemical Mechanical Planarization of Dioxide Semiconductor", Key Engineering Materials, pp.1-24, Trans Tech, Switzerland.

Hocheng, H., Tsai, H.Y. and Su, Y.T., 2001, "Modeling and Experimental Analysis of Material Removal Rate in Chemical Mechanical Planarization of Silicon Dielectric Films and Bare Silicon Wafer", Journal of the Electrochemical Society, Vol.148, No.10, pp.G581-586.

Hocheng, H. and Cheng, C.Y., 2002, "Visualized Characterization of Fluid Film Between Wafer and Pad during Chemical Mechanical Planarization", IEEE Trans. Semiconductor Manufacturing, Vol.15, No.1, pp.45-50.

Hocheng, H. and Huang, Y.L., 2003, “A Comprehensive Review of Endpoint Detection in Chemical Mechanical Planarization for Deep-Submicron Integrated Circuits Manufacturing”, International Journal of Materials and Product Technology, Vol 18 No. 4/5, pp.469-486.

Hocheng, H. and Huang, Y.L., 2004, “In-Situ Endpoint Detection by Pad Temperature in Chemical Mechanical Polishing of Copper Overlay”, IEEE Trans. Semiconductor Manufacturing, Vol. 17, No. 2, pp.180-187.

Hocheng, H. and Chen, C.C., 2005, “A Study of the Chemical-Assisted Mechanical Polishing of CVD Diamond Film", Special Issue of Materials Science Forum, Vols.505-507, pp.1225-1230.

Wang, C.C., Lin, S.C. and Hocheng, H., 2002, “A Material Removal Model for Polishing Glass-Ceramic and Aluminum Magnesium Storage Disk”, International Journal of Machine Tools and Manufacture, Vol.42, pp.979-984.

Chen, S.Y., Lin, S.C. and Hocheng, H, 2005, “Polishing Glass-ceramic Based Rigid Disk”, Material Science Forum, Vols.505-507, pp.1213-1218.

S. C. Lin, H. C. Huang, and H. Hocheng, 2005, “Effects of Slurry Components on the Surface Characteristics when Chemical Mechanical Polishing NiP/Al Substrate”, Thin Solid Film, Vol.483/1-2, pp.400-406.

Lin, J.B., Lin, S.C., Hocheng, H., 2005, “A Simulation Approach of Dishing in Chemical Mechanical Polishing of Inlaid Copper Structures ”, Journal of the Electrochemical Society, Vol. 152, pp. 664-668.

Hocheng, H. and Huang, Y.L., 2007, “In-situ Endpoint Monitoring by Acoustic Emissions in Chemical Mechanical Polishing of Metal Overlay”, IEEE Trans. Semiconductor Manufacturing, Vol. 20, No. 3, pp.306-312.

Nanoimprint
Hocheng, H. and Nien, C.C., 2006, "Numerical Analysis of Effects of Mold Feature and Contact Friction on Cavity Filling in Nanoimprinting Process", Journal of Microfabrication, Microlithography, and Micromachining, Vol.5, No.1, pp.011004-1-7.

Hocheng, H., and Nien, C.C., 2006, “In-situ Monitoring of Cavity Filling in Nanoimprint by Capacitance”, The Japanese Journal of Applied Physics, Vol.45, No.6B, pp.5590-5596.


Hocheng, H. and Nien, C.C., 2007, "A Review of Monitoring for Nanoimprinting", Journal of Achievements in Materials and Manufacturing Engineering celebrating the 60th birthday of Prof. Leszek A. Dobrzanski, Vol.24, No.1, pp.382-389.

Hocheng, H., and Hsu, W.S., 2007, “Effects of Back Grooves on Improving Uniformity in Nanoimprint Lithography”, The Japanese Journal of Applied Physics, Vol.46, 9B, pp.6370-6372.

Hocheng, H., Wen, T.T. and Yang, S.Y., 2008, “Replication of Microlens Arrays by Gas-Assisted Hot Embossing”, Materials and Manufacturing Processes, Vol. 23, pp.261-268.

Hocheng, H. and Wen, T.T., 2008, “Electromagnetic Force-Assisted Imprint Technology for Fabrication of Submicron-Structure”, Microelectronic Engineering, Vol. 85, pp. 1652-1657.

Hocheng, H. and Hsu, W.S., 2009, “An Innovative Method for Uniform Pattern Transfer in Nanoimprint”, Journal of NanoScience and NanoTechnology, Vol.9, pp.4267-4272.

Hocheng, H. and Wen, T.T., 2009, “Innovative Rapid Replication of Microlens Arrays using Electromagnetic Force-assisted UV-imprinting”, Journal of Micromechanics and Microengineering, Vol.19, pp.1-6.

Hocheng, H. and Wen, T.T., 2010, “Submicron Imprint of Trench Structures by External and Intrinsic Electromagnetic Force”, CIRP Annals - Manufacturing Technology, Vol.460, pp.25-28.

Hocheng, H., Huang, Z.Y. and Chou, T.S., 2010, "A Brighter Place: Overview of Microstructured Sunlight Guide", Journal of Achievements in Materials and Manufacturing Engineering celebrating the 65th Anniversary of Materials Science and Engineering in Silesia in memory of the late Prof.J. Adams, Vol. 43, pp.409-417.

Hocheng, H., Hsu, W.H. and Shy, J.T., 2011, "In-Situ Monitoring of Pattern Filling in Nanoimprint Lithography using Surface Plasmon Resonance", Journal of NanoScience and NanoTechnology, Vol.11, pp.5279-5284.

Hocheng, H. and Huang, Z.Y., 2011, "Microstructural Fabrication and Design of Sunlight Guide Panels of Inorganic-Organic Hybrid Material", Energy and Buildings, Vol.43, pp.1011-1019.

Hocheng, H. and Hsu, W.H., 2013, "Process Monitoring for Nanoimprint Lithography", a chapter in Advances in Electrical Engineering, Ed. F. Columbus, Nova Science (in press)

Hsu, W.H., Hocheng, H. and Shy, J.T., 2013, "Surface Plasmon Resonance as an Innovative Method for Filling Defects Monitoring in Nanoimprint Lithography ", Applied Surface Science, pp.94-101.

Hocheng, H., Hsu, W.H. and Shy, J.T., 2013, "A Method for In-Situ Measurement of Residual Layer Thickness in Nanoimprint Lithography", Microelectronic Engineering, pp.132-140.

Huang, T.Y., Hocheng, H., Chou, T.H., Yang, W.H., 2013, "Bring Free Light to Buildings: Overview of Daylighting System", a chapter in Energy Book Series - Volume 1: Materials and Processes for Energy, Formatex, Spain. (in press)

Micro-Device
Hocheng, H., Pan, C.T. and Cheng, C.C., 2003, “Formation of Micro-Lens by Reflow of Dual Photoresist”, The Japanese Journal of Applied Physics, Vol.42, No.6B, pp.4044-4047.

Hocheng, H., Kao, K.S. and Fang, W.L., 2004, “Fatigue Life of a Microcantilever Beam in Bending”, Journal of Vacuum Science Technology B: Microelectronics and Nanometer Structures, Vol. 22, No.6, pp.3143-3146. and Virtual Journal of Nanoscale Science & Technology, Vol. 10, No. 26, doi:10.1116/1.1821502. (publication selected by this journal from JVST: 23 papers out of 148)


Lin, Y.C., Hocheng, H., Fang, W.L. and Chen, R., 2006, "Fabrication and Fatigue Testing of an Electrostatically Driven Microcantilever Beam", Materials and Manufacturing Processes, Vol.21, No.1, pp.75-80.

Guu, Y.H., Hocheng, H. and Chang, C.H., 2008, “Study of Piezoelectrically Actuated Micropumps with Multi Parallel Chambers”, Materials and Manufacturing Processes, Vol. 23, pp.1-6.

Hocheng, H., Hung, J.N. and Guu, Y.H., 2008, "Various Fatigue Testing of Polysilicon Microcantilever Beam in Bending", The Japanese Journal of Applied Physics, Vol.47, pp.5256-5261.

Hocheng, H., and Tseng, C., 2008, “Mechanical and Optical Design for Assembly of Vascular Endothelial Cells Using Laser Guidance and Tweezers”, Optics Communications, Vol. 281, pp. 4435-4441.

Hung, J.N., Hocheng, H. and Sato, K., 2011, "Torsion Fatigue testing of Polycrystalline Silicon Cross-Microbridge Structures", The Japanese Journal of Applied Physics, Vol.50, p. 06GM07-1-p. 06GM07-5.

Hung, J.N. and Hocheng, H., 2012, “Frequency Effects and Life Prediction of Polysilicon Microcantilever Beams in Bending Fatigue”, Journal of Micro/ Nanolithography, MEMS, and MOEMS (JM3), Vol. 11, No. 2, 021206.

Hocheng, H., Wong, W.S. and Chang, J.H, 2012, "Shape Effects of Micromechanical Cantilever Biosensor", Measurements:Journal of the International Measurement Confederation, pp.2081-2088.

Biomachining/Microbe-based Patterning

Chang, J.H., Hocheng, H., Chang, H.Y. and Shih, A., 2008, “Metal
Removal Rate of Thiobacillus Thiooxidans without Pre-secreted Metabolite”, Journal of Materials Processing Technology, Vol 201/1-3, pp. 560-564.


Hocheng, H., Wang, J.C. Chang, J.H. and Shen, W.C., 2009, “Laser-guided Pattern Writing through Thiobacillus Ferrooxidans Metabolite”, Microelectronic Engineering, Vol. 86, pp.565-568.

Hocheng, H., Chang, J.H.  and Jadhav, U.U., 2012, “Micromachining of various metals by using Acidithiobacillus ferrooxidans 13820 culture supernatant experiments”, International Journal of Cleaner Production, Vol. 20, pp. 180-185.

Hocheng, H., Chang, K.E. and Chang, J.H., 2012, "Threshold of Laser-Activated Writing of Metal using Microbe Metabolite ", International Journal of Machine Tools & Manufacture, pp. 51-57.

Hocheng, H., Chang, J., Hsu, H., Han, H. and Chang, Y., 2012, “Metal Removal by Acidithiobacillus ferrooxidans through Cells and Extra-cellular Culture Supernatant in Biomachining”, CIRP Journal of Manufacturing Science and Technology, Vol.5, No.2, pp.137-141.

Jadhav, U.U. and Hocheng, H., 2012, “A Review of Recovery of Metals from Industrial Waste ", a review paper in Special Issue of Journal of Achievements in Materials and Manufacturing Engineering celebrating the 65th birthday of Prof. L.A. Dobrzanski, Vol.54, 00.159-167.

Hocheng, H., Jadhav, U.U. and Chang, J.H., 2012, “Biomachining Rates of Various Metals by Acidithiobacillus Thiooxidans”, International Journal of Surface Sciences and Engineering, Vol. 6, pp.101-111.

Hocheng, H., Chang, J.H. and Umesh, J., 2012, "Biomachining -- Acidithiobacillus Genus-Based Metal Removal ", a chapter in Micromanufacturing Processes, pp. 99-112, Ed. V.K. Jain, CRC Press, USA.

Jadhav, U.U. and Hocheng, H., 2013, “Extraction of Silver from Spent Silver Oxide-Zinc Button Cells by Acidithiobacillus Ferrooxidans Culture Supernatant”, International Journal of Cleaner Production. Vol.44, pp.39-44.

Hocheng, H., Lin, T.C., Jadhav, U.U. and Wong, W.S., 2013, “Writing Metal on SiO2 by Laser through Culture Supernatant of Acidithiobacillus Ferrooxidans 13820”, Microelectronic Engineering, Vol.101, pp.17-22.

Jadhav, U.U., Hocheng, H. and Weng, W.H., 2013, "Innovative Use of Biologically Produced Ferric Sulfate for Machining of Copper Metal and Study of Specific Metal Removal Rate and Surface Roughness during the Process", Journal of Materials Processing Technology, Vol.213, pp.1509-1515.

Others
Hocheng, H., 1995, "Critical Matrix Yielding Stress and Interfacial Fracture in Forming of Metal Matrix Composite Wires", JSME International Journal, Vol.38, No.4, pp.625-630.

Hocheng, H. and Chen, H.C., 1996, "Mechanical Design Major Components of the Single Pole Carriage in <<Khao Kung Chi>>",Tsing Hua Journal of Chinese Studies, Vol.25, No.1, pp.419-450.

Tai, N.H., Lee, K.P., Hocheng, H., Liu, C.S., 1999, “Processing and Characterization of Carbon Fiber Reinforced Ceramic Nanocomposites”, Key Engineering Materials, Vol. 164-165, pp. 105-108.

Chang, Y. and Hocheng, H., 2001, "Flowability of Bentonite Bonded Green Molding Sand", Journal of Materials Processing Technology, Vol 113, pp. 238-244.

Hocheng, H., Chen, C.M., Chou, Y.C. and Lin, C.H., 2010, “Study of a Novel Electrical Routing and Integrated Package on Bio-compatible Flexible Substrates”, Microsystem Technologies, Vol.16, pp.423-430.

Guu, Y.H., Mai, C.C. and Hocheng, H., 2012, "Applications of Carbon Nanotubes in Nontraditional Machining and Microscopy", a chapter in Carbon Nanotubes: Synthesis, Properties and Applications, Nova Science, USA, ISBN 978-1-4614-4053-6.

Books

Hocheng, H., and Chen, R., 2003, Nano/Microsystems and Manufacturing, a book published byInderscience, Switzerland.

Hocheng, H. and Wang, K.Y., 2011, Analysis of Excimer Laser Machining of Micropatterns, a book published by LAP Lambert Academic Publishing, Germany, ISBN: 978-3-8443-9569-3.

Hocheng, H., 2012, Machining Technology of Composite Materials: Principles and Practice, a book published by Woodhead Publishing, Cambridge, ISBN 0857090305, 488 pages.

Hocheng, H. and Faruk, Y., 2012, Characterization of Surface in Materials Processing, a book published by Inderscience, UK.

Hocheng, H. and Tsai, H.Y., 2013, Advanced Analysis of Nontraditional Machining, a book of Springer, New York, ISBN 978-1-4614-4053-6, 500 pages.


     
 


清華大學動力機械工程學系 製造與生產系統實驗室
新竹市光復路二段101號 工程一館 R630 & 631
最佳瀏覽為 IE7/IE8 瀏覽器,最佳瀏覽解析度1280x1024以上解析度.

 
element02   element04